Livraison offerte des 79 € (France metropolitaine) | -10% premiere commande
Free delivery from 79 € purchase (Metropolitan France) -10% off your first order

VMG low friction ring to screw on

A partir de 32,90 

VMG Yacht Design has designed a range of reliable low friction rings, to be screwed on a deck or a bulkhead, for example.
Robust, lightweight and efficient, the screw-on low friction ring by VMG Yacht Design was designed to be directly embedded in laminated hulls, bulkheads and decks.

Chainplate, fairlead or padeye (by simply adding a dogbone), its applications are multiple.



The VMG Yacht Design screw-on ring was conceived to be embedded to laminated hulls, bulkheads or decks.

  • Used like a chainplate, it serves as a fixing point for the lashing of textile rigging.
  • Integrated to the roof, it can also be used as a through-deck fairlead: a smart solution to hide control lines under the deck.
  • Combined to a Dogbone, the VMG Yacht Design friction ring turns into a padeye (fixation for mast-foot blocks, stacking lines, friction rings, etc.)

VMG Yacht Design developed these screw-on rings to pass the rope through the deck and bulkheads with minimal loss due to friction. Thanks to this through-hull fairlead for ropes from 4 to 18 mm, it is now possible to diverge control lines.

Product Rope diameter
Thickness composite
Drilling diameter (mm)Inside diameter
Outside diameter (mm)Weight (gr)

These fairleads can be used under high load if they are fitted with a carbon or fibreglass counterplate.

Additional infomation for professionnals

Picto 3D pour le web

Additional information

Weight N/A


V4, V8, V10

This product should only be used for the above-mentioned uses. Do not hesitate to contact us if you have any questions.
The installer and user shall be held responsible for any incorrect use.

You may also like…